破碎篩分流程的計算是怎樣的
破碎篩分流程的計算，一般只是確定各個破碎產品的和篩分產品的絕對重量，即產量（噸/時）。以Q表示，和相對重量即產率（%）表示，以此作為選擇破碎的篩分設備的依據，并使各段的負荷能夠大致平衡，使各段的破碎機與篩分機處于最優狀態下工作。
應該之處，當破碎作業中有預選，洗礦（脫泥），選別作業時，則預選、洗礦、選別的產品還應計算其品位和回收率，
在破碎篩分的過程中，僅是礦石的粒度以及粒度組成發生變化，而進入個作業的產物重量（或產率）與從該作業排除的產品重量仍然是相等的，少量機械損失或其他流失在計算時均不考慮，過意各產品或產率的計算均可按重量或產率的平衡方式來求出。
由于破碎作業的工作制度往往與磨礦作業不同，所以破碎作業的處理能力（噸/時）計算即為選礦廠規模（噸/天）除以破碎作業的工作時數，
原礦粒度特性曲線可以通過工業試驗確定，也可以借用可碎性相近的典型粒度特性曲線、有時即直接應用原礦式型粒度曲線，
可以通過工業性試驗直接測定，但測定工作量太大，一般可以根據礦石可碎性試驗或功指數值選用類似選礦廠的實際粒度特性曲線，也可以根據典型粒度的特性曲線確定、
篩條效率要根據實際資料合理選擇，粗碎和中碎的作預先篩分用的條篩，篩分效率一般在50-60%，中碎和粗碎的預先篩分用的條篩。篩分效率一般在80-85%。篩孔尺寸和篩孔效率的正確選擇，對篩子的生產能力影響很大，篩孔尺寸一般在破碎機排礦口與破碎產品最大粒度之間選取，或根據工藝要求確定。
How to calculate the crushing and screening process.
破碎篩分流程的計算，一般只是確定各個破碎產品的和篩分產品的絕對重量，即產量（噸/時）。以Q表示，和相對重量即產率（%）表示，以此作為選擇破碎的篩分設備的依據，并使各段的負荷能夠大致平衡，使各段的破碎機與篩分機處于最優狀態下工作。
Crushing and screening process of the calculation, generally only to determine the absolute weight of the various crushing products and screening products, that is, production (T / h). In Q said, and relative weight that yield (%) said that so as to selection on the basis of crushing and screening equipment, and sections of the load can be roughly balanced, the sections of the crusher and sieving machine work in the best condition.
應該之處，當破碎作業中有預選，洗礦（脫泥），選別作業時，則預選、洗礦、選別的產品還應計算其品位和回收率，
It should be, when the crushing operation in the pre selection, washing (mud), the election of the job, the pre selection, washing, and other products should be calculated to calculate the grade and recovery rate,
在破碎篩分的過程中，僅是礦石的粒度以及粒度組成發生變化，而進入個作業的產物重量（或產率）與從該作業排除的產品重量仍然是相等的，少量機械損失或其他流失在計算時均不考慮，過意各產品或產率的計算均可按重量或產率的平衡方式來求出。
In the process of crushing and screening, the size of the ore is changed, and the product weight (or yield) is equal to the weight of the product, which is not considered in the calculation.
由于破碎作業的工作制度往往與磨礦作業不同，所以破碎作業的處理能力（噸/時）計算即為選礦廠規模（噸/天）除以破碎作業的工作時數，
As the operating system of the crushing work is often different from the grinding operation, the processing capacity of the crushing operation (T / h) is calculated as the number of the working hours of the ore dressing plant (T / D) divided by the number of jobs,
原礦粒度特性曲線可以通過工業試驗確定，也可以借用可碎性相近的典型粒度特性曲線、有時即直接應用原礦式型粒度曲線，
Ore grain size characteristic curve can be determined through industrial test and can also borrow broken similar typical characteristic size curve, sometimes application directly, ore type, particle size curve,
可以通過工業性試驗直接測定，但測定工作量太大，一般可以根據礦石可碎性試驗或功指數值選用類似選礦廠的實際粒度特性曲線，也可以根據典型粒度的特性曲線確定、
Can be directly measured by industrial test, but the amount of work is too large, the general can be determined according to the ore can be broken test or power refers to the actual size of the ore dressing plant, can also be determined according to the characteristics of the typical grain size curve,
篩條效率要根據實際資料合理選擇，粗碎和中碎的作預先篩分用的條篩，篩分效率一般在50-60%，中碎和粗碎的預先篩分用的條篩。篩分效率一般在80-85%。篩孔尺寸和篩孔效率的正確選擇，對篩子的生產能力影響很大，篩孔尺寸一般在破碎機排礦口與破碎產品最大粒度之間選取，或根據工藝要求確定。
Screen efficiency according to the actual data reasonable choice, and the crushing and crushing of the screening, screening efficiency is generally in the 50-60%, in the crushing and crushing of the pre screening sieve. Screening efficiency is generally 80-85%. The correct selection of the mesh size and mesh efficiency and production capacity of sieve effect, sieve size general crusher row between the maximum mine mouth and crushing product size selection, or according to the technological requirements identified.
|
